Recent Project

Minneapolis Church Metal Repaint Over Rust

Rust was pushing through the old paint on a Minneapolis church's garage doors, entry doors, and assorted metal surfaces. The coatings had aged out, and the building was starting to look tired to the people walking up to it every week.

The church reached out to us for maintenance painting on a handful of items around the property, with a clear timing request and a budget that had to work. We walked the building, priced the scope, and put together a plan that hit both. This commercial metal painting project in Minneapolis, Minnesota, came down to honest prep work and the right coating system, and we handled it as the Commercial Painting Company the church could schedule around its services.

Key Takeaways

  • THE CHALLENGE
    Rust and aging paint on garage doors, entry doors, and various metal surfaces left an occupied church building looking worn.
  • THE COATING
    We power washed and sanded the metal, applied a rust-inhibitive metal primer, and finished with Sherwin-Williams DTM industrial topcoats.
  • THE RESULT
    Every surface was fresh and inviting by Sunday service, with a finish we expect to hold seven to 10 years.

Rust does not stay put under a fresh coat of paint, so the only approach worth quoting was full prep followed by a primer and topcoat system built for metal. Direct-to-metal paint over a rust-inhibitive primer gives a church a long service interval for the money, which matters when the budget has to stretch across a whole building. We also knew the work had to fit around worship, so the schedule was part of the solution, not an afterthought.

Project Summary

Client Profile:A church congregation in Minneapolis
Project Location:Minneapolis, Minnesota
Primary Objective:Stop rust on aging metal and keep the building looking fresh and inviting for the congregation through Commercial Exterior Painting
Coating System:Rust-inhibitive metal primer with Sherwin-Williams DTM industrial topcoats, applied after Power Washing Services and sanding
Key Outcome:Garage doors, entry doors, and assorted metal refinished, approved at a final walkthrough, with seven to 10 years of expected service

Rust Found on Church Metal

When we walked the building, the story was the same on every item: rust working through the coating and previous paint that had simply given up with age. None of it was failing in a way that threatened the structure, but it read as neglect from the sidewalk, which is the last thing a church wants.

Tired paint on metal cannot be recoated as-is. Any topcoat laid over active rust will lift and bleed within a season or two, so the list of doors and metal surfaces needed to be taken back to sound material before a single drop of finish went on.

Sanding, Priming, and DTM Topcoats

We started with a power wash to pull dirt and chalk off every surface, then sanded the rusted areas back by hand so the primer had clean, sound metal to grab. From there we applied a rust-inhibitive metal primer to seal the prepared areas, followed by Sherwin-Williams DTM industrial paint. Application was a combination of spraying where we could mask off cleanly and brush-and-roll on the tighter details, which is standard practice on commercial work like this.

★★★★★
"Jon the owner is great. I really appreciated the constant communication I had with Jon throughout the project. The project was completed surprisingly quickly and the quality is excellent. I would recommend Jon and his team for any project." —

Scheduling carried as much weight as the coatings. We performed the work during regular Monday through Friday business hours, communicating which areas we needed access to and when, so the staff could plan around us and the building kept running. You can see more of this kind of work in our Commercial Painting Gallery, and more of what clients say about working with our crew in our Customer Reviews.

Fresh and Inviting by Sunday

A couple of fresh coats over properly prepared metal made a clear difference on the garage doors, entry doors, and the other metal items on the list. Everything was finished and cleaned up by the end of the week, so the congregation arrived Sunday to a building that looked cared for. We closed the project with a final walkthrough, and the work was approved.

The church was ecstatic with the results. With a rust-inhibitive primer under DTM topcoats, we anticipate these finishes lasting seven to 10 years, depending on how hard the doors get used and how much weather they take. For a maintenance budget, that is a long stretch before the subject comes up again.

Need Metal Repainted at Your Building?

We handle commercial metal painting for churches, retail, and property owners across the Twin Cities, and we have spent years sorting out rusted doors, signposts, and mechanical units. We work during your hours, tell you exactly which areas we need, and keep you in the loop from the first walkthrough to the last.

Have rust showing on doors or metal at your building in Minneapolis? Let's take a look and put a straight price in front of you.

Get Fresh Paint
Maple Grove, MN
Call 612.325.1409 or Schedule Online

Frequently Asked Questions

Can you just paint over rust on a Minneapolis church building?

No. Rust has to be prepared first, which means sanding the affected areas back and using the correct primer and topcoat system. On this Minneapolis church we power washed, sanded, applied a rust-inhibitive metal primer, and finished with Sherwin-Williams DTM industrial paint. Skipping that prep means the new coating fails early and the rust comes right back through.

Can you paint our building while services and business continue?

Yes. We worked this church during regular Monday through Friday business hours so everything was finished and fresh by Sunday service. On every commercial project we work with the customer's schedule, stay flexible, and communicate which areas we will need access to and when, so you can anticipate any change to your daily operation.

How long will Sherwin-Williams DTM last on doors and metal?

We anticipate these finishes lasting seven to 10 years, depending on how often the doors are used and how much weather exposure the metal takes. Doors in constant daily use will show wear sooner than fixed metal surfaces. A wash-down each season and an early call when you first see rust showing will keep the next repaint a maintenance item rather than a restoration.

If You Want It Done Right,
Call Get Fresh Paint

Located out of Maple Grove, Minnesota, Jon started Get Fresh Paint over 20 years ago inside a garage in Maple Grove and has since evolved his business into an independently operated painting company. We proudly serve homes and businesses all throughout the Twin Cities and surrounding areas.

Jon - Founder of Get Fresh Paint
John Smith

John Smith

Project Manager

Jane Doe

Jane Doe

Lead Developer

Mike Johnson

Mike Johnson

UX Designer

Sarah Wilson

Sarah Wilson

Marketing Director

Tom Brown

Tom Brown

Sales Manager

Emily Davis

Emily Davis

HR Director